Maul Tech ATV Custom Shock Setup Form

I will be updating this form shortly with pictures to make sure everything is entered correctly.  The purpose of this form is to save you and me both time in getting your suspension setup correctly and more accurately.  If you have any questions while filling out the form, please call us at 217-491-0804.

 

Contact Info


You will not be charged until service is completed.

Bike Info


(Center of Front Hub to Center of Axle)
 

Current Setup Measurements

All measurements should be taken using the tires you will be running and aired to proper pressure! All Current Setup Measurements should be taken with the rider in full gear standing on the footpegs.

 (only on triple rate shocks)


 
Any measurement taken from here on must be with all 3 shocks removed from the quad!

Front End Measurements

The next 2 measurements are taken with the bottom of frame raised off the ground at 12" and 1 1/2". And the measurements taken are from eye to eye where your shocks mount to your frame and A-Arm.

Front Shock Measurements (Taken with shock lying on floor)


 

Rear End Measurements

The next 2 measurements are taken with the bottom of frame raised off the ground at 12" and 1 1/2". And the measurements taken are from eye to eye where your shocks mount to your frame and Swingarm.

Rear Shock Measurements (Taken with shock lying on floor)


 
 
We recommend printing out 2 copies before submitting your form. 1 for you to keep and 1 to send in with your shocks.